- Built in rotary cylinder, free from draw bar and rotary cylinder
- Work with most popular collet, easy to find replacement or repair in local
- Double piston, provide more clamping force in limited O.D
- Import selected deep groove ball bearing, stable and tough
- Self-lock design on the close side to offer higher safety
- High resistance to coolant fluid and cutting chips (Fluid and dust proof when air feeding in)
- Please usd 5um filter in F.R.L units
- Easy installation, no specialist required
 |
 |
 |
|---|---|---|
| 5μm Filter. Applies in all series of JAP100/JAP200 a set go along with packing |
Applies : On Lathe | Applies : On 4/5 axis rotary table |
| JAP207-42BZI | JAP209-65BZI | JAP210-80BZI | |
|---|---|---|---|
| A | 197(7.76") | 234 ( 9.21" ) | 247 ( 9.72" ) |
| B (P.C.D.) | 172(6.77") | 213 ( 8.39" ) | 226(8.9") |
| C | 155(6.1") | 185 ( 7.28" ) | 200(7.87") |
| D | 42(1.65") | 65 ( 2.56" ) | 80(3.15") |
| E | 5(0.22") | 5.5(0.22") | 5.5 ( 0.22" ) |
| F | 146 ( 5.75" ) | 149 ( 5.87" ) | 140.5 ( 5.53" ) |
| G | 69.5 ( 2.74" ) | 76 ( 2.99" ) | 72 ( 2.83" ) |
| H | 146(5.75") | 187.5 ( 7.38" ) | 196 ( 7.72" ) |
| Mounting Bolts | 3H-M10 ( front )+ 3H-M10 ( rear ) | 6H-M10 ( front )+ 6H-M10 (rear) | 6H-M10 ( front ) |
| Collet | 42BZI Collet | 65BZI Collet | 80BZI Collet |
| Max. RPM | 2500 | - | - |
| Air Pressure | 3-7kg/cm² (43-100 psi) | 3-8kg/cm² (43-114 psi) | 3-8kg/cm² (43-114 psi) |
| Max. Capacity | 42 mm (1.65") | 65 mm ( 2.56" ) | 80 mm (3.15") |
| Piston Area | 256cm² | 304cm² | 405cm² |
| Gripping Force | 3530 kgf@7kg/cm² ( 7782 lbf@100psi ) | 5010 kgf@7kg/cm² ( 11045 lbf@100psi ) | - |
| Net Weight | 21.9 kgs ( 48.3 lbs ) | 29.9 kgs ( 65.9 lbs ) | - |