JAP100 Air Diaphragm Power Chuck is a precision diaphragm power chuck with a built-in air cylinder. Provides 0.003mm repeatability. Suitable for precision parts or thin-wall parts chucking.

JAP200 Air Collet Chuck has built-in air cylinder. Easy for users to build a power chuck system without an additional hydro cylinder, tank, or pump. Work with 5C, 16C , B42(173E) and B60(185E) collets.

CHP200 Hydraulic Collet Chuck is specially designed to provide a hassle-free power chuck solution for rotary table applications.

JAM/JHM Spindle Collet Chuck is an integration of rotary spindle and power collet chuck, makes it an ideal solution for building special purpose machines.

Collet Type Rotary Power Chuck has built-in air/hydro cylinder and is the most economic solution for converting a manual lathe to a full/semi automated one. Works with 5C, YB-25, B42(173E) and C-44 collets.

Jaw Type Rotary Power Chuck has built-in air/hydro cylinder and is the most economic solution for converting a manual lathe to a full/semi automated one. Chucking capacity ranging from 3mm to 120mm.

High precision Jaw Diaphragm Power Chuck with 0.003mm repeatability. JTN300-H works with NC Lathes. JTN300-G works with high precision grinders. Both of them are suitable for fragile parts machining.

High precision and high speed 3 jaw open center power chuck. Full compatible with Kitagawa B200 series power chuck. Chuck size ranging from 5" to 18".

High precision and high speed 2 jaw open center power chuck. Full compatible with Kitagawa BT200 series power chuck. Chuck size ranging from 5" to 18".

High precision and high speed 4 jaw open center power chuck. Chuck size ranging from 5" to 18".

High precision dead length collet chuck for CNC lathes. High speed up to 6000RPM. Work with B42(173E) and B60(185E) collets.

JATO JP-42/JP-44 collet chuck is designed to perform I.D. chucking by installing a mandrel or to perform O.D. chucking by a regular B42(173E) or C-44 collet.

JAL Open Center Air Cylinder provides equivalent pushing/pulling force with regular hydraulic cylinders. Speed is up to 5500RPM with very low temperature rising. Suitable for regular power chuck or collet chucks.

CTH Series Open Center Hydraulic Cylinder has built-in check valve. With large through hole and strong output force, CTH hydro cylinder is an ideal solution for rear actuators of regular power chuck.

CAL Close Center Air Cylinder is powered by compressed air, saving cost on hydro pump and tank. CAL is an economic solution for setting up your power chuck system.

CHL Close Center Hydraulic Cylinder has compact size and is light weighted, provides large actuating force for power chucks or collet chucks.

JAR Series Air Cylinder is specially designed to direct mount onto bench lathe's spindle without any adaptor. Powered by compressed air, high speed up to 4000RPM.

JHR Series Hydraulic Cylinder is specially designed to direct mount onto bench lathe without any adaptor. JHR uses hydro static bearing design which features compact size and light weighted.

JATO ERS/YBS Series Stationary Collet Chuck can be installed vertically or horizontally on machine center or tapping center. Works with ER20, ER40, ER50, YB-25 or 5C collets.

JTV Series Multi-Function Power Vise can be installed vertically or horizontally. Widely applied on machine centers for O.D. clamping or I.D. expanding for workpart with regular or irregular shapes.

JATO 2/3/4-Jaw Vertical Power Chuck has large through hole and are with strong clamping force. Suitable for machine centers and tapping centers.

JATO JAS/JHS Stationary Chuck owns the most compact size. High resistence to dust and fluid. Widely used on drilling/milling tasks.

JATO JAF Stationary Chuck features lowest-cost design. High resistence to dust and fluid. Widely used on drilling tasks.